11. TALLY Light Operation
There are front and rear TALLY lights on the monitor, which can display RED, GREEN and AMBER
signals. The TALLY light controlling port is the RJ45 socket at the rear panel, and terminal description is
as follows:
The RED light is on when connecting the terminal “R” with “GND”, and goes out when disconnecting.
The GREEN light is on when connecting the terminal “G” with “GND”, and goes out when disconnecting.
The AMBER light is on when connecting the terminal “Y” with “GND”, and goes out when disconnecting.
12. Cold Shoe Bracket
The provided monitor bracket support both cold shoe and screw mount for camera connection.
1. For cold shoe: anticlockwise screw the knob to draw the bolt back, slide the cold shoe mount into
camera, and then clockwise adjust the knob to fasten.
2. For screw mount: clockwise screw the knob to draw the bolt directly into the screw thread of camera
till fastened.
3. Screw the ball head knob into monitors, and lock the ball head.
Terminal
1
2
3
4
5
6
7
8
Description
Y
G
GND
R
①
Lock
②
Knob
③
Cold shoe mount
④
Screw bolt
