9. Trouble shooting
10. Specification
If the receiver failed to output video correctly, the possible causes are as below; please find the solution
from following chart:
The receiving
video
No display
Poor
Video quality
Possible causes
The transmitter or the receiver
Is not powered on
The antennas are not installed
properly and screwed tightly
Bad connection of video cable
Video format is not supported
Bad connection with video cable
The wireless transmission is
disturbed by environment
The transmission distance is out of
effective
Solution
Check power connection and switch on
the transmitter and receiver
Install the antennas properly and screw
tightly of both transmitter and receiver
Check video cable connection of both
transmitter and receiver
Change the output video format of the
camera
Reconnect reliably
Wait for 1 minute or reboot the transmitter
and receiver
Put the transmitter closer to the receiver
Model
Input
Output
Video format
Wireless frequency
modulation mode
transmission distance
Power consumption
operation
Input voltage
Working environment
Dimension
(without antenna and plate)
Net weight
（With antenna and rack）
FLOW6500 Transmitter
FLOW6500 Receiver
SDI×1、HDMI×1
SDI×1
1080I（60/59.94/50）/1080PsF（24/23.98）/720P（60/59.94/50)/1080P
（60/59.94/50/30/29.97/25/24/23.98）
5180~5220MHz and 5760~5820MHz
OFDM Support 16QAM, 64QAM, QPSK, BPSK modulation mode
2000m（Line of sight）
≤9W
0.96 inches OLED display screen, five-direction adjust button
DC/ Battery：7～34V
Temperature ：0℃~+40℃
66×106.5×24.7（mm）
286g
/
SDI×1
≤9W
DC/ Battery ：7～34V
190×190×46（mm）
1500g
Indicator
Power
Video
Link
