7.High quality mode & Wall through mode
⑵ Connecting SDI OUT interface of FLOW6500 receiver with SDI IN interface of monitor or switcher.
When using one-to-multi mode, every SDI OUT interface of receiver should be connected with SDI IN
interface of monitor or switcher.
⑶ Switch on both FLOW6500 transmitter and receiver, “Power”indicator light up，OLED screen show
“WAIT�”then jump to initial interface，see fig.1 or fig.3;Wait until “Link” and “Video” indicator light up,
the transmitter and receiver have identifiable signal inputs and connected successfully. If the transmit
ter and receiver have identifiable signal inputs but fail to establish a connection, the "link" indicator
will flash.
Tips：
1. When wireless devices under normal operating condition, choose High
quality mode can get a better video quality, but transmission distance
will be cut.
2. When wireless devices under complex operating condition, choose Wall
through mode can get a long transmission distance, but the video quality
will be cut.
⑴ Connecting SDI IN/HDMI IN interface of FLOW6500 with SDI OUT/HDMI OUT interface of camera
or video output device.
Connecting SDI loop out interface of FLOW6500 transmitter with SDI IN interface of monitor or
switcher.
⑵ When using one-to-multi mode, every SDI OUT interface of receiver should be connected with
SDI IN interface of monitor or switcher.
⑶ Switch on both FLOW6500 transmitter and receiver, every receiver should be switch on when
using one-to-multi mode.
“Power”indicator light up，OLED screen show“WAIT�”then jump to initial interface, see fig.1
or fig.3;Wait until “Link” and “Video” indicator light up, the transmitter and receiver have
identifiable signal inputs and connected successfully, right push the joystick to“PREF”
interface, see fig.11.
⑷ It is recommended to choose high quality mode for wireless devices under normal operating
conditions, such as better environment, stronger signal, or more than one set of wireless
devices under the same scene.
⑸ Wall through mode is recommended for wireless devices under complex operating conditions,
such as poor on-site environments, high distance barriers and only 1-2 sets of wireless devices
in the same scene. (If more than one set is used in the same scene, it is recommended to use a
high quality mode to reduce interaction)
PREF.
HIGH
QUAL
WALL
THRU
Fig.11
Tips：
1. After powering the FLOW6500 transmitter and receiver, dial the power switch on the product to "on"
2. FLOW6500 transmitter support SDI video signal input and HDMI video signal input, The system
automatically identify input video interfaces.
System will choose SDI video signal when both HDMI and SDI interface is connected.
3. When multiple receivers are used simultaneously in the same environment, ensure that multiple
wireless devices have identifiable signal input.
