SWIT CW-H150 User Manual Download Page 9

 

 

7. Battery Plate 

CW-H150 Battery plate choice 
 

CW-H150 is equipped with DV battery plate to be powered by standard DV batteries. There’re following 
different types of DV batteries for choice: 

 

Plate type 

Compatible battery 

Recommended SWIT battery 

Sony L series NP-F770/970 

S-8972

S-8970

S-8770 

U Sony 

BP-U60/30 

S-8U93

S-8U63 

Panasonic CGA CGA-D54S/D28S 

Panasonic VBD VW-VBD58 

S-8D62

S-8D58 

B Panasonic 

VW-VBG6 

S-8BG6 

J JVC 

BN-V428 

S-8428 

V JVC 

BN-VF823 

S-8823 

I JVC 

SSL-JVC50 

S-8I50 

C Canon 

BP-930/945/970G 

S-8945

S-8845 

Canon DSLR battery LP-E6 

S-8PE6 

   
Note: The battery plates are fixed at factory, please specify the suitable plate type before purchase.   
 
 

8. Trouble shooting   

If the receiver failed to output video correctly, the possible causes are as below, please find the solution from 
following chart: 

The receiving 

video  

Possible causes   

Solution 

No display 

No power 

Check power connection and switch on 
the transmitter and receiver 

The antennas are not installed properly 
and screwed tightly 

Install the antennas properly and screw 
tightly of both transmitter and receiver 

Bad connection of video cable 

Check video cable connection of both 
transmitter and receiver 

Video format is not supported 

Check the format of video source. 
  (See the supported video formats at 

Specifications

.) 

Video quality is 

poor 

Bad connection of video cable 

Check video cable connection and if 
possible, change to better quality cables

The wireless transmission is disturbed 
by environment, such as other 
electronic devices in the same 
location. 

Wait for one minute or reboot both the 
transmitter and receiver 

The transmission distance is out of 
effective range or being interfered by 
obstacles. 

Try the wireless transmission at a closer 
distance or clean out the obstacles 

 
 
 

Summary of Contents for CW-H150












Reviews: