SWIT CW-H150 User Manual Download Page 2

Preface 

 

1

 All internal technologies of this product are protected, including device, software and trademark. 

Reproduction in whole or in part without written permission is prohibited. 

2

 All brands and trademarks of SWIT Electronics Co., Ltd. are protected and other relative trademarks 

in this user manual are the property of their respective owners. 

3

 Due to constant effort of product development, SWIT reserves the right to make changes and 

improvements to the product described in this manual without prior notice. 

4

 The warranty period of this product is 2 years, and does not cover the following:   

(1) Physical damage to the products;   

(2) Any damage or breakdown caused by use, maintenance, or storage not according to the user 

manual’s instructions;   

(3) The attenuation of signal quality resulting from being used in any special environments; 

(4) Any damage caused by not powering the product by package supplied power adaptor. 

(5) Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing 

quality, etc. 

5

 For any suggestions and requirements on this product, please contact us through phone, fax, Email, 

etc. 

 
 
 
 
 
 
 
 
 
 
 
 

 

SWIT Electronics Co., Ltd. 
 

Address: 10 Hengtong Road, Nanjing Economic and Technological Development Zone, 

         Nanjing 210038, P.R.China 

Phone: +86-25-85805753 

Fax: +86-25-85805296 

Email: [email protected] 

Website: http://www.swit.cc 

Summary of Contents for CW-H150












Reviews: