⑴ Time code（SDI）
Display the information of time code which is embedded in SDI signal（LTC，VITC1&2），moni-
tor will show “TC:UNLOCKED” if no time code information is detected.User can set shortcut
key（F1~F5） or GPI pin to “time code” function，in order to quickly switch on/off this function.
⑵ On screen TALLY
The tally signal is controlled by GPI.
⑶ Source ID/UMD
Display/UMD（TSL3.1/4.0），user can set in the UMD menu.
⑷ Lissajous pattern
Lissajous pattern will show audio signal，user can set shortcut key（F1~F5） or GPI pin to
“Lissajous pattern” function，in order to quickly switch on/off this function.
⑸ Waveform
User can switch on/off “Waveform” function or choose different type of waveform by setting
shortcut key(F1~F5) or GPI pin to “Waveform” function on the front panel.The parameters
such as on-screen-position,transparency and color of “waveform” can be set in MENU.
⑹ Vector scope
User can switch on/off “Vector scope” function by setting shortcut key(F1~F5) or GPI pin to
“Vector scope” on the front panel.The parameters such as on-screen-position,transparency
and color of “Vector scope” can be set in MENU.
⑺ Audio meter
In order to monitor audio signal，User can switch on/off “Audio meter” function by setting
shortcut key(F1~F5) or GPI pin to “Audio meter” function on the front panel. The parameters
such as on-screen-position, transparency and numbers of audio channel of “Audio meter” can
08
·OSD
in phase
L
R
TC
00:15:13:07
CAMERA
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
