4.OLED Display menu
Initial interface （One-to-one mode）
When no signal input，the transmitter is consistent
with the receiver display content. See Fig. 1
Initial interface （One-to-one mode）
When Transmitter and receiver video signal con-
nection normal, the transmitter is consistent with
the receiver display content. See Fig. 2
No signal input
Frequency channel display
Signal strength display
No signal input
Frequency channel display
One-to-multi mode display
No signal input
Frequency channel display
Signal strength display
Fig. 1
Signal source display
Signal format
Frequency channel Display
Signal strength display
Signal source display
Signal format
Frequency channel Display
One-to-multi mode display
Signal source display
Signal format
Frequency channel Display
Signal strength display
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
SDI
1080P
60HZ
AUTO
M
NO
SYNC
AUTO
M
NO
SYNC
AUTO
M
SDI
1080p
60HZ
AUTO
M
NO
SYNC
AUTO
SDI
1080p
60HZ
AUTO
Initial interface （One-to-multi mode）
When the transmitter has no signal input,
see Fig. 3
Initial interface （One-to-multi mode）
When the receiver has no signal input,
see Fig. 5
Initial interface （One-to-multi mode）
When the receiver video signal is connected
normally, as shown in Fig. 6
Initial interface （One-to-multi mode）
When the transmitter video signal is connected
normally, as shown in Fig. 4
Tips:
1. Using joystick(up and down) to change frequency channel, 7 channel in total.
2. After changing to 0ne-to-multi mode, There will be a “M” show on the bottom
