SWIT Electronics FLOW500 Rx, User Manual

Page: 6 / 11

Receiver FLOW500
⑴ Antenna
⑵ ON/OFF ：Power switch
⑶ USB ：Micro USB, software upgrade interface
⑷ Link ：Wireless status indicator
⑸ Video ：Video signal indicator
⑹ Power ：Power status indicator
⑺ DC in ：Support DC 7-34V voltage input, 5.5mm (outer diameter) /2.1mm (inner diameter).
Outside: negative, Inside: positive
⑻
OLED ：0.96-inch OLED
⑼ Five-direction switch ：Five-direction adjustment button. (adjust the display menu to switch and
confirm in five directions up, down, left, right, and vertical)
⑽
Installation thread ：1/4 ” -20 thread, Use the package supplied articulating arm trestle to install the
device to the camera
⑾
HDMI OUT : HDMI output (HDMI-A type connector)
⑿ SDI out : SDI output (BNC connector)
⒀ Battery plate ：Power supply via D & F & U model battery plate. Model D battery we recommend
SWIT battery: S-8D98、S-8D58 、S-8D62 which is compatible with Panasonic CGA
series ;CGA-D54S/D28S、VBD series SVW-VBD58；Model F battery we recommend SWIT battery:
S-8972、S-8970、S-8770、S-8975，which is compatible with SONY L series NP-F770/970；Model U
battery we recommend SWIT battery LB-SU98，，which is compatible with PXW-FX series
BP-U60/U30/U90.
Status
Constant On
Off
Constant On
Flash
Constant On
Flash
Description
Power connected and switched on
Power disconnected and switched off
There is recognizable video signal input
There is no recognizable video signal input
The wireless network connection is normal
The wireless network connection is abnormal
Device
FLOW500
Receiver
LED indicator
Power
Video
Link
The description of LED status indicator
(1)
(2)
(3)
(5)
(6)
(7)
(8)
(11)
(9)
(12)
(13)
(10)
(4)