SWIT Electronics BM-U243, User Manual

Page: 14 / 23

Tally: Turn the tally display on/off.
Tally Position : Tally display position setting.
F1~F3 : Assign functions to the function keys F1 ‒ F3 on the front key board. F1-F3 can be setted as
the down below functions:
Time Code, Color Temp, Flip Mode, Native Mode, Waveform, UMD, Marker, H/V Delay, Blue Only,
Audio Bar, Zebra, Vector, Low Latency mode, Histogram, Odd/Even Frame.
UMD : Turn the tally display on/off.
UMD Color : Color setting.
Position : Display position setting.
Size: Size setting.
UMD Blending: Adjust the UMD background transparency.
Display Type: Choose display type.
(1)Select “UMD” to display Source info and Tally info from external control devices of TSL protocol.
(2)Select “Source ID” to display a user input fixed source info, and Tally info by GPI input.
RS485 Address : Fixed value.
Baud Rate : Fixed value.
Source ID : Setting of “Source ID”.
RS485 pin sequence and definition:
7.Assist
Exit: Return to Main Menu.
False Color: Turn on/off False color mode.
Blue Only: Turn on/off Blue only mode.
Focus Assist: Turn on/off focus assist mode and select focus line color.
Zebra: Turn on/off zebra stripes for over exposure check.
14
Pin
Pin
GPI
GPI
1
GPI_1 GPI_2
6
NC
GPI_3
GPI_6 GND
5
GPI_5
2 3
7
4
GPI_4
8
Assist
Exit
False Color
Blue Only
Focus Assist
Zebra
ColorChecker
Waveform
Vector
Histogram
Marker
OFF, ON
OFF, ON
OFF, Blue,Red
OFF, ON
>
>
>
>
Pin
1
2
3
4
5
6
7
8
IN
GND
NC
RXD-
NC
NC
RXD+
TXD-
TXD+
OUT
GND
NC
RXD-
NC
NC
RXD+
TXD-
TXD+