SWIT Electronics Co.,LTD. CW-S150, User Manual

Page: 10 / 11

8. Trouble shooting
If the receiver failed to output video correctly, the possible causes are as below, please find the solution from
following chart:
The receiving
video
Possible causes Solution
No display
No power
Check power connection and switch on
the transmitter and receiver
The antennas are not installed properly
and screwed tightly Install the antennas properly and screw
tightly of both transmitter and receiver
Bad connection of video cable
Check video cable connection of both
transmitter and receiver
Video format is not supported
Check the format of video source.
(See the supported video formats at
Specifications
.)
Video quality is
poor
Bad connection of video cable
Check video cable connection and if
possible, change to better quality cables
The wireless transmission is disturbed
by environment, such as other
electronic devices in the same
location.
Wait for one minute or reboot both the
transmitter and receiver
The transmission distance is out of
effective range or being interfered by
obstacles.
Try the wireless transmission at a closer
distance or clean out the obstacles
9. Specification
Model CW-S150 Transmitter CW-S150 Receiver
Input SDI×1 /
Output SDI×1 SDI×2
Video format
1080i
（
60 ⁄ 59.94 ⁄ 50
）
⁄ 720p
（
60 ⁄ 59.94 ⁄ 50) ⁄ 1080p
（
60 ⁄ 59.94 ⁄ 50 ⁄ 30 ⁄ 29.97 ⁄ 25 ⁄ 24 ⁄ 23.98
）
Wireless
frequency
5.1
～
5.9GHz
Radio module OFDM 16QAM
Max transmission
distance
150m ( Line of sight)
Latency ≤ 1 millisecond
Power
consumption
≤ 9W ≤ 7.5W
Radio power 100mW ⁄
Input voltage DC ⁄ Battery: 7 ～ 36V DC ⁄ Battery: 7 ～ 36V
Working
environment
Temperature: 0
℃
~+40
℃
Dimension(without
antenna)
86.68×137.6×40(mm) 115.79×146×49.5(mm)
Net weight (with
antenna)
445g 549g