Swissvoice Babycom 268, User Manual

Page: 56 / 100

Babycom 268
54
Note
:
- There is no need to set CTCSS code before using the Babycom 268
for the first time: As soon as you switch the parental and baby units
on, they automatically search for a shared code.
- If you are using the adapters for power, connect them first, and then
switch the units on before changing the CTCSS code.
Setting the sensitivity (baby unit only)
Set the preferred sensitivity level by sliding the black switch on the
battery compartment of the baby unit:
- Up: (HI) = high sensitivity (responds to noises within a range of 2-6
meters)
- Down: (LO) = medium sensitivity (responds to noises within a range of
1-2 meters).
Scanning the
corresponding
code
automatically
Corresponding
code was
scanned
successfully
Code scanning
failed
Parental unit:
Flashing
Parental unit:
Baby unit:
still
flashing
still
flashing
Flashing
or
Baby unit:
Baby unit and parental unit:
Constantly changing Normal status
Babycom 268 EN_080909:Babycom 143 10.09.09 11:32 Seite 54