10
Installing and charging the handset
• Remove the battery cover from the back of the handset and insert the
rechargeable Li-Ion battery cell supplied. Make sure that the battery is inserted
correctly (observe battery jack inside battery compartment).
Press down
Slide
• Connect the charger as shown below and place the handset on the charger.
• If you are charging the battery for the first time, charge for at least 24 hours.
• When the handset is fully charged,
icon is steady on.
Connecting the charger
Connect the charger as shown in the figure below. Switch on the mains power.
Only for multiple packs:
1. If you have purchased a multiple pack, you need to connect each charger and
install and charge every handset.
2. When an additional handset is fully charged,
icon will appear and the
display shows
HANDSET
and handset number (e.g. 2) to indicate that it is
registered to the base.
IMPORTANT
Warning! Use only the approved rechargeable Li-Ion battery cell (Swissvoice BL-4C,
3.7V, 550mAh, 2.04Wh) supplied with your L7.