• Fully charge the lantern before turning on.
• Rotate the Dimmable Knob to turn on the lantern and adjust the brightness.
• Press the Bluetooth Speaker Power Button to turn on the Bluetooth Speaker.
• Press the Volume – button to decrease music volume.
• Press the button to increase music volume.
• Press the Play/Pause button to stop and start music at any time.
OPERATING HEADLAMP
• Never use this lantern around flammable liquids such as gasoline.
• To avoid electrical shock, do not put lantern in water or any other liquids.
• Do not store lantern where it can easily fall into tub/sink/pool of water.
• Do not handle this lantern or try to plug this in while your hands are damp or wet.
• Do not operate this lantern after it has malfunctioned.
• Always make sure the power source conforms to the rating on this fixture. Hence, this
lantern light must always be used in accordance with all electrical and safety codes
and ordinances, including the most recent National Electric Code (NEC) and with
the Occupational Safety and Health Act (OSHA) Volume 1 on General Industry
Standards and interpretations.
• Do not use or permit use of lantern in beds or sleeping bags as this fixture can melt
fabric and may result in burn injury.
SAFETY INFORMATION
• Battery charging indicator is red when charging and is green when fully charged.
• Battery charging indicator is blue when USB output is used to charge other devices.
• USB port cannot be used while the lantern is recharging, but the Bluetooth speaker
remains functional.
• If the lantern is fully charged, it can light up, play music and charge other devices.
• When the battery is completely drained, the lantern will take about 3-5 hours to fully
charge.
RECHARGING THE BATTERY
&
CHARGING
FOR OTHER DEVICE
The charging cable is compatible with any USB wall adapter that has an output of
5V/2A.
• To ensure proper charging, use the enclosed USB charging cable.
• Pull by plug rather than cable when disconnecting work light to avoid damage to
electric plug and cable.
ELECTRICAL INFORMATION
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC STATEMENT
SPECIFICATIONS
864g
6.5-inches
5.5-inches
10.2-inches
Input/Output:5V, 2A
13W
Charging Cable
Mode
Run Time
Recharge Time
Lumen Output
Impact Resistance
40-inches
Dimmable
3 hours or more
3 to 5 hours
1000LM, dimmable
3-feet
Product Weight
Product Width
Product Depth
Product Height
Rated Voltage
Power
5
6
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may
cause undesired operation.
CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
