Swisson XRC-200, User Manual

Page: 7 / 31

7 English
Recording a Sequence
Make sure, that the XRC-200 is in NORMAL mode before trying to record. Hint: This is the case after resetting the
XRC-200 to the FACTORY SETTINGS.
Connect the XRC-200 between your light controller and your light equipment.
Enter the number of the sequence to record (from 1 to 64) and press the record button.
Now the XRC-200 is ready to record
Press play to start the recording process.
It's possible to interrupt recoding with the pause button. Press play to resume recording.
Press stop to end the recording process.