Swisson XRC-200, User Manual

Page: 14 / 31

14 English
FULL ACCESS
No restrictions.
PLAYBACK ONLY
User may not record. A restricted menu allows for unlocking the keypad and switching to the
standby mode.
KEYPAD LOCKED
User may not play, record or enter the menu. Main screen is shown.
KEYPAD LOCKED STANDBY
Standby screen is shown. All keys are locked.
SET PASSWORD
Launches a dialog to set the password.
FACTORY SETTINGS
Restores the unit to the original factory settings.
FORMAT MEMORY
Formats the entire memory. This deletes all sequences.
VERSION INFO
Displays the hardware version and the installed firmware version, as well as the amount of available memory.
Creating a Playlist
Recorded sequences may be concatenated in a playlist. XRC-200 playlists offer the following features:
•
The fade in time may be set individually for each sequence change.
•
Sequences may be repeated for a given number of times or until an External Contact is triggered.
•
Playlists may wait for a given time of the day or for an External Contact to be triggered.
Playlists are edited as follows. In the main screen, simply enter the number of a playlist (101 to 110), and then
press the record button. If the playlist has not yet been edited , a table will appear that looks as depicted.
When a cell of the second column is highlighted, simply press OK to get a list of
available playlist commands. Using the up and the down arrow keys, a command may
be highlighted. By pressing the OK button, the command is stored in the playlist. If the
command has a parameter, the cell in the next column on the same row of the table
becomes highlighted.
XRC-200 has the following playlist commands.
STOP
The playlist is stopped when this line is reached.
GOTO <LINE NBR>
When this command is executed, the playlist continues on <LINE NBR> rather than on the line below.
WAIT PARAM1 PARAM2
Available values for PARAM1 are FOR CONTACT, UNTIL TIME and FOR PLAY PRESSED.