4. Show Disk Info >
Displays disk status and disk block info.
Calculator State menu
The calculator reads last used state file after a hardware RESET (i.e. after pressing the [RESET] on
the back of the calculator).
Reading of last stored calculator state file can be bypassed (eg. when the FAT disk is corrupted and
the calculator hangs after a reset while reading the state file) by holding the
[
-
]
key and pressing
the [RESET] button on the back of the calculator.
1. Load State
Displays list of available calculator state files (.s42 extension) from /STATE/ directory.
To load calculator state file:
• Select particular file and press
[
ENTER
]
to load the state file.
• Confirmation dialog appears and you have to acknowledge you want to abandon current
calculator state.
If confirmed, calculator is restarted and selected calculator state file loaded.
2. Save State
Used for saving current calculator state to a *.s42 file into the /STATE/ directory of the flash storage.
To save state file: - Select existing filename as target or type new target filename, confirm with
[
ENTER
]
- Confirmation dialog can appears if existing file is about to be overwritten
If confirmed, calculator state is saved and subsequently is the calculator restarted and the
calculator state file reloaded.
3. Load Clean State
Restarts the calculator without reading the state file (same as [RESET] +
[
-
]
).
Print to File menu
For functional details look at
Printing to File
.
1. Graphics Print
Selecting this menu item enables printing to graphics file.
11
