manualshive.com logo in svg

Swisscom Top E604 ISDN, User Manual

Share
Download
Swisscom Top E604 ISDN User Manual Download Page 46

44

SMS (text messages)

CX 253i / SWZ PTT en / A31008-X353-P100-1-19 / sms.fm / 03.12.2007

SMS (text messages)

You can use your base station to send and receive SMS text messages (

S

hort 

M

essage 

S

ervice). You ca send an SMS to any fixed network or mobile phone network number. 

Your SMS can be received as a text message by any device with SMS functionality 

(mobile phone, PC, another telephone). If the recipient of your SMS does not have a 

phone with SMS functionality, then the SMS is played back (SMS 2phone). 

General

Text messages are exchanged between SMS centres that are operated by service provi-

ders. The telephone number of the SMS centres through which you wish to send and 

receive text messages must be entered in your phone (page 46). Up to ten SMS centres 

can be entered. You can change the phone numbers of the SMS centres.
You can receive text messages via 

any

 of the SMS centres whose number you have ente-

red. Of course you must be registered to receive text messages with those SMS centres 

(page 48). 
Your text message is sent through the SMS centre that is entered as the 

active 

send 

service centre.

Before you can send and receive text messages

◆

Calling Line Identification may not be permanently deactivated for the MSN used 

(page 23).

◆

To receive text messages you must be registered with your service provider 

(page 48).

◆

You must not allow the network provider to bar the phone numbers you have 

entered for SMS centres.

If the telephone of a receiver cannot receive an SMS in the fixed network, the SMS is 

automatically read as a voice message. Between 7.00 and 22.00 hrs, these text 

messages are delivered immediately in the form of a telephone call. Text messages sent 

after 22.00 hrs are stored and delivered the next day.
If you have concluded a preselection contract with a network provider, ask whether they 

support the "Fixed line SMS" feature. (Preselection means you are bound contractually 

to a network provider.)

i

All SMS functions are dependent on the network provider.

i

The mobile phone is delivered with the access number (062 210 00 00) 

of the Swisscom SMS Center already pre-programmed.

Summary of Contents for Top E604 ISDN


































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands