123
Operating when connected to a PABX
CX 253i / SWZ PTT en / A31008-X353-P100-1-19 / pabx.fm / 03.12.2007
Setting options
You can switch between the settings
Standard dial
(factory setting),
Auto keypad
and
Dial * and #
.
Standard dial
Once
Standard dial
has been activated,
*
and
#
are not transmitted during dialling, and
if
*
and
#
are entered it is not possible to switch to the keypad.
Auto keypad
Once
*
or
#
has been entered, this setting automatically transfers ringing during dialling
to the keypad. This automatic switchover is needed for giving commands to the
exchange or PABX.
Dial * and #
Once
Dial * and #
has been activated, the
*
and
#
characters are transmitted during
dialling as commands to the exchange or PABX.
Regardless of the setting options above,
after dialling
or during the conversation, the
phone switches automatically to tone dialling (DTMF), e.g. for remote control of an
answering machine.
Activating/deactivating the keypad during a call
In addition to the ongoing settings described above, you can also switch over
temporarily to the keypad.
The setting is only applicable to the current external call and is automatically
deactivated after the call is ended.
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
~
Enter system PIN if required (page 89).
s
System settings
Select the menu item and confirm.
s
Spec. function
Select the menu item and confirm.
s
Dial properties
Select the menu item and confirm.
s
Standard dial
Select the setting and confirm, e.g.
Standard dial
(
‰
= activated).
OK
OK
OK
OK
OK
OK
OK
i
Open the menu.
either ...
Activate the keypad:
s
Keypad on?
Select the menu item and confirm.
~
Enter the keypad code.
or ...
Deactivate the keypad:
s
Keypad off?
Select the menu item and confirm.
OK
OK
