28
20405097en
_ba_a0
Telephoning
Internal enquiry call
You are conducting an external call. Call the desired internal party.
If the second handset answers, you can talk to the internal call partner without the
external caller hearing you.
You can switch between the two call parties or connect all three calls into a 3-party-
conference. Refer to chapter “Brokering” and “Conference calls“ for more details.
Note
• You cannot use the
Int
key if the call duration is not displayed.
• If the second handset does not answer, you can end the ringing signal and
return to the original call by pressing the softkey under
END
.
• Internal enquiries are managed by the base station and are not dependent
on your network operator’s available services.
Brokering (switching between two calls)
You have two active calls (1 internal and 1 external), one of which is on hold.
1. Press the key
Int
or the softkey under
OPTIONS
,
BROKERING
to switch between
the call partners. Press the softkey under
OPTIONS
,
CONFERENCE
to connect all three
call partners with each other.
2. Press
to end one of the calls. The remaining call partners are automatically
connected with each other.
Note
Brokering between two external call partners is managed by the public
telephone network and is therefore dependent on your network operator’s
available services (network functions). Find out whether these network
functions are supported.
Summary of Contents for Aton CL311
Page 1: ...Aton CL311 CLT311 User manual...
Page 70: ...68 20405097en_ba_a0...
Page 71: ......
Page 72: ...en 01 2009 SV 20405097en_ba_a0...