Swisscom Aton CL311, User Manual

Page: 17 / 72

15
20405097en
_ba_a0
Setting up the telephone
Charging the batteries
The batteries are not yet charged when you first unpack the telephone. Insert the hand-
set in the base station for charging. The flashing battery symbol on the handset shows
the charging status. The batteries will take around 14 hours to fully charge.
Note • Do not insert the handset in the base station without batteries.
• Do not use any other type of charging unit since this may damage the
batteries.
The following symbols indicate the charging status on the handset display:
Charging status “full”
Charging status “1/2”
Charging status “empty”
Once the new batteries have been inserted, the display on the handset indicates the
actual charging status only after a complete charging cycle.
Your telephone is now ready to use.
Important!
Please note: after you have inserted the batteries for the first time, the battery display will
indicate the correct information on the charging status only after a complete charging cycle.
Use only approved rechargeable batteries NiMH AAA. Never use disposable
batteries/primary cells.
Approved models: – GP80AAAHC – GN85AAAHC
– H-AAA750A-UN – H-AAA900A
– GP75AAAHC