Icon
Feature
Smart-Key Setup
Wecker
Anrufer sperren
*1 Aton CLT200 series: page 3
*2 Aton CL200 series: page 3
Screen saver mode
The backlight goes dark when on a call or
turns off completely after 1 minute of
inactivity
if the handset is not on the base unit
or charger.
Activate the handset display again by:
– pressing
MFN
or
MEN
when on a call.
– pressing
M
N
at all other times.
Turning the power on/off
Power on
Press
M
N
for about 1 second.
Power off
Press
M
N
for about 2 seconds.
Initial settings
n
Direct command code:
Programmable settings can be accessed by
pressing
(middle soft key),
#
and
then the corresponding code on the dial
keypad (page 25).
Example:
Press
(middle soft key)
#101
.
n
Symbol meaning:
Example:
MbN
:
“
Aus
”
Press
MCN
or
MDN
to select the words in
quotations.
Important:
R
When you install the batteries for the first
time, the handset may prompt you to set
display language and date and time.
Perform step 2 in “Display language”,
page 15, and then press
.
Continue from step 2 in “Date and
time”, page 15.
Display language
1
(middle soft key)
#110
2
MbN
: Select your desired language.
a
3
M
N
Date and time
1
(middle soft key)
#101
2
Enter the current date, month, and year.
a
Example:
15 July, 2012
15
07
12
R
You can select the date format by
pressing
#
:
– dd/mm/yy (date/month/year)
– yy/mm/dd
3
Enter the current hour and minute.
Example:
9:30
09
30
R
You can select 24-hour or 12-hour
clock format (
“
AM
”
or
“
PM
”
) by
pressing
.
4
a
M
N
Note:
R
The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Voice guidance language
Available for:
Aton CLT200 series (page 3)
You can select either
“
Deutsch
”
,
“
Français
”
or
“
Italiano
”
as the voice
15
Getting Started
ATON_CL200_CLT200(en-de)_0731_ve15 15
2014/07/31 20:28:33
