Note:
R
After turning the repeater mode on or off,
is displayed on the handset
momentarily. This is normal and the
handset can be used once
is displayed.
Registering the DECT repeater
(Repeater RTX 4002) to the base unit
Note:
R
Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
1
Base unit:
Proceed with the operation for your model.
n
Aton CL200 series: page 3
Press and hold
M
N
for about 5
seconds. (No registration tone)
n
Aton CLT200 series: page 3
Press and hold
M
N
for about 5
seconds, until the registration tone
sounds.
R
The next step must be completed
within 90 seconds.
2
DECT repeater:
Connect the AC adaptor, then wait until
the
indicator and
indicator light
green.
3
Base unit:
To exit the registration mode, press
M
N
.
R
The registration tone stops.
(Aton CLT200 series: page 3)
35
Programming
ATON_CL200_CLT200(en-de)_0731_ve35 35
2014/07/31 20:28:34
