Swisscom Aton CL200, Operating Instructions Manual

Page: 16 / 56

guidance language of the answering system.
The default setting is
“
Deutsch
” .
1
(middle soft key) #112
2
MbN : Select the desired setting.
3
a M N
Smart function key
(Smart-Key)
The smart function key (Smart-Key) is located
on the top of the handset and informs you with
its flashing to allow you to activate the
following features by simply pressing this key.
n
When the smart function indicator
flashes rapidly, you can:
– Answer the call (outside call, intercom).
(page 18, 45)
– Stop the alarm sound. (page 31)
– Stop paging. (page 45)
n When the smart function indicator
flashes slowly in standby mode, you can:
– Listen to new messages. *1 (page 40)
– View the caller list when there are
missed calls. (page 37)
To activate these features, their Top key
setup must be “On”. (page 16)
*1 Aton CLT200 series: page 3
Using the smart function key
(Smart-Key)
When the smart function indicator flashes
rapidly/slowly, press
M Smart-Funktion N .
R The above features can be activated
depending the situation.
R If you answer a call using the smart
function key, the speakerphone is activated.
R Even if the handset is placed on the base
unit or charger, the feature can be
activated. You can talk or listen to new
messages
*1
without lifting up the handset. If
you want to perform further operations, lift
up the handset.
R When the unit has new messages *1 and
missed calls, the unit can be operated to
play the new messages first and then show
the missed calls.
*1 Aton CLT200 series: page 3
Note:
R While key lock is on (page 20), incoming
calls can be answered, but the following
features are disabled even when the smart
function indicator flashes slowly.
– Listen to new messages.
*1 (page 40)
– View the caller list when there are
missed calls. (page 37)
*1 Aton CLT200 series: page 3
Setting the smart function key
(Smart-Key Setup)
The Top key setup for the following features
must be “On”.
–
“
Neue Nachricht
” *1 (Default: On)
– “
Entgangener Anruf
” (Default: Off)
The settings can be set for each handset.
*1 Aton CLT200 series: page 3
1
(middle soft key) #278
2
MbN : Select the desired setting and press
.
R “ ” is displayed next to the selected
features.
R To cancel a selected feature, press
again. “ ” disappears.
3
a M N
Note:
R If the smart function indicator flashes when
the handset is not placed on the base unit
or charger, battery consumption is faster
than usual.
One touch eco mode
When the handset is on the base unit, the
base unit transmission power is reduced up to
99.9 % if only one handset is registered.
Even when the handset is not on the base unit
or several handsets are registered, the base
unit transmission power in standby mode can
be reduced up to 90 % by activating one touch
eco mode.
16
Getting Started
ATON_CL200_CLT200(en-de)_0731_ve16 16 2014/07/31 20:28:33