39
Appendix
CE-conformity
This device is intended to be operated on the analogue Swiss network. Country-
specific conditions have to be taken into account. If you have any questions
about the differences between the public phone networks, please contact your
specialist dealer or network provider.
Swisscom hereby declares that this device meets the essential requirements and
other relevant regulations laid down in Directive 1999/5/EC.
The Declaration of Conformity can be found the following web site:
www.swisscom.ch/onlineshop.
Maintenance/Warranty
Rental devices
If your phone does not operate properly, notify Technical Assistance (phone
number 0800 800 800).
The repair
1)
and the fault action are free of charge.
Problem
After pressing the
assistance call key, no
number is dialled
As for connection at a
PABX: No line or wrong
line after dialling from
the memory (e. g. speed
dialling)
As for connection at a
PABX: Recall key
without function
possible cause
- No assistance number
is stored
- assistance call modus
is deactivated.
- Exchange identification
code not entered.
- dialling pause is too
short
Recall key function not
set correctly
recommended action
- Store assistance numbers
(see page 23)
- set assistance call modus
(see page 24)
- Enter exchange identifica-
tion code (see page 34)
- program dialling pause (see
page 35)
- Change recall key function
(see page 34)
