22
Chapter 6
– Replacing Filters
Chapter 6 – Replacing Filters
The system is equipped with a filter life monitor which is designed to assist you in determining when a filter needs
to be replaced. If the pollution load is high and the filter load indices are not set appropriately, there is a possibility
that the filter may not be effective throughout the displayed life time.
For this reason it is important to look out for the signs of used up filters. The main signs are:
•
Increased operating noise
•
Decreased airflow
•
Clogged filter
•
Increased odour presence
6.1 Location of the Filter Elements
The system features a modular housing design which enables easy replacement of all filters in a matter of minutes.
The illustration of the system on the right side of the control panel shows the positions of the individual filters. These
positions correspond to the actual positions of the filters within the system.
6.2 Ordering Replacement Filters
Please order the replacement filter elements from your point of purchase by quoting the name and the article
number of the filter. Both can be found on the label of the individual filter element.
5.3 Replacing the Battery of the Remote Control
When the battery becomes weak, the transmission results will deteriorate and
the battery should be replaced. The remote control requires one CR2025
battery. The battery compartment is located at the bottom end of the remote
control.
To open the battery compartment, press the small leaver to the side and slide
the battery compartment out. Remove the used battery and insert the new
battery.
