Swiss Timing TRACKER, User Manual

Page: 14 / 21

Page 10
Version 2.1
3442.500.02
To modify the value, use the alphanumeric keyboard or the keys (plus 1) and (minus
1), then press the key to confirm the entry. To go back to the initial value, press on the
key instead of the key. Repeat this procedure until all the values match your
requirements.
The synchronization of the clock must be done at 0 second by pressing the
key in the
selection menu.

An internal battery allows to keep the exact time and date during 30 days after the last
switch off.

The parameters of the console and sports always remain in the memory (not limited in
time).
3.5 Console setting
This screen displays the software version, allows to change the software and set the
default parameters:
Use the “ESC” key to exit this menu.
3.5.1 Default parameters
By pressing the “Default” key, the standard parameters are set for the software:
50s for the countdown
12 for the lap counter
Bip of 0.5s at 30s
Bip of 0.5s at 10s
Bip of 0.3s at 5s
Bip of 0.3s at 4s
Bip of 0.3s at 3s
Bip of 0.3s at 2s
Bip of 0.3s at 1s
Beep of 0.5s at 0s
0 (automatic) for the Tracker luminosity
This operation has to be done after a firmware upgrade.