d
— 3 —
5. Adjust Connecting Bolt Length
· Measure and adjust the length of the connecting
bolt to be d + 13/16”.
6. Anchor Bowl
· Hand tighten the notched pegs (B) onto the mounting
bolt, be sure the notch is facing up.
WALL-HUNG TOILET
INSTALLATION INSTRUCTIONS
A
B x2
C x2
D x2
7. Attach Bowl
· Insert the retaining bolt (C) into the mounting hole
on the back of the toilet from the inside.
· Secure the retaining bolt by screwing the two parts
together using the retaining bolt key, use the allen
wrench (A) to hold the retaining bolt (C) in place to
tighten. Repeat for the other mounting hole.
· Apply lubricant to the joint surface on straight tube
and connecting pipe, then place bowl onto the
mounting bolts.
8. Secure and Seal
· Insert set screws (D) into the top of the retaining bolts
(C) using the set screw installation tubes, then tighten
with the allen wrench (A) to secure the bowl.
· Fill any gaps with cement or sealant to seal.
B
C
C
A
B
D
D
D
A
d
+
¹³⁄16
”
