CUSTOMER RESPONSIBILITIES
V-Belts:
Check V-belts for deterioration and wear before each use and replace if necessary. Replace belts if they begin to
slip from wear. SEE SPECIFICATION for belt part numbers and SERVICE section of this manual for instructions
on how to replace the belt.
Engine:
REFER TO YOUR ENGINE OWNERS MANUAL.
Overall Unit Care:
Reduce the risk of fire by removing grass, leaves and other debris that may have accumulated on the
machine.
Allow the machine time to cool before cleaning or putting it in storage.
Wash mower periodically. Clean above and below deck.
Keep all electrical connections clean and tight.
Driving & Transport on Public Roads:
Check applicable road traffic regulations before driving and transporting on public roads.
If the machine is transported, you should always use approved fastening equipment and ensure that the
machine is well anchored to the towing vehicle.
The cutting deck should also be lowered to the lowest position and the parking brake engaged during transport.
Three 18 ½” Gator™ Mulching Blade System
BLADES
FRONT: 12 X 6 X6 w/ 5/8 Bearing / REAR: 20 X 10 X 10
TIRE SIZE
27 ±3 ft. lbs
HYDRO BOLT TORQUE
Welded / 1 x 2 x 3/16” Wall Steel Tubing
FRONT AXLE
Foot Operated, Spring Assisted
DECK LIFT
18” Back w/ Arm Rest / 4” Adjustable Slide
SEAT
Commercial Grade Hydro-Gear ZT-2800
TRANSMISSION
Manual Lever
PARKING BRAKE
Approximately 1.5” – 5”
CUTTING HEIGHT
54”
DECK WIDTH
LENGTH: 81”
WIDTH: 62” (Including Grass Chute)
HEIGHT: 40”
WEIGHT: 762 lbs
UNIT MEASUREMENTS
35 ft. lbs
BLADE BOLT TORQUE
12V / Heavy Duty 300 CCA / Type U1L
BATTERY
FRONT: 40 psi Max / REAR: 22 psi Max
TIRE PRESSURE
0 – 8 mph
GROUND SPEED
SEE ENGINE MANUAL
SPARK PLUG
SEE ENGINE MANUAL
OIL TYPE (SPI-SF-SJ):
DUAL 4.0 GAL TANKS; UNLEADED REGULAR
GASOLINE CAPACITY AND TYPE
12
12
Specifications