Swisher ZT2760A, Owner'S Manual

Page: 12 / 40

CUSTOMER RESPONSIBILITIES/SPECIFICATIONS
V-Belts
Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. Replace belts if
they begin to slip from wear. SEE SPECIFICATION for belt part numbers and SERVICE section of this manual for
instructions on how to replace the belt.
Engine
REFER TO YOUR ENGINE OWNERS MANUAL
Overall Unit Care
Reduce the risk of fire by removing grass, leaves, and other debris that may have accumulated on the
machine. Allow the machine time to cool before cleaning or putting it in storage.
Wash mower periodically. Clean above and below deck.
Keep all electrical connections clean and tight.
Driving and Transport on Public Roads
Check applicable road traffic regulations before driving and transporting on public roads.
If the machine is transported, you should always use approved fastening equipment and ensure that the
machine is well anchored.
The cutting deck should also be lowered to the lowest position and the parking brake engaged.
FRONT: 4.10x3.5-5 5/8 Bearing
REAR: 18 X 9.5 X 8
TIRE SIZE
27 + - 3 ft. lbs HYDRO Bolt Torque
Pivoting FRONT AXLE
Spring Assisted DECK LIFT
15” Back w/ Arm Rest
6” Adjustable Slide
SEAT
Commercial Grade Eaton Hydrostatic TRANSMISSION
Spring Assisted PARKING BRAKE
1.5” – 5” CUTTING HEIGHT
60” – 3 Mulching Blade System CUTTING WIDTH
LENGTH: 70”
WIDTH: 60 1/4 “
Including Deck
WEIGHT: 600 lbs
UNIT MEASUREMENTS
35 ft. lbs BLADE BOLT TORQUE
12V / Heavy Duty 275 CCA
Type U1L
BATTERY
FRONT: 50 psi Max
REAR: 22 psi Max
TIRE PRESSURE
0 – 6 mph GROUND SPEED
SEE ENGINE MANUAL SPARK PLUG
SEE ENGINE MANUAL OIL TYPE (SPI-SF-SJ):
DUAL 2.0 GAL TANKS
UNLEADED REGULAR
GASOLINE CAPACITY
AND TYPE
12 12
SPECIFICATIONS