1
2
3
4
5
6
7
8
9
7
Assembly Instructions
Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need
to be removed. Please retain plate and hardware to be reinstalled if the plate is removed.
Blade Mount Kit
1.
Separate and Identify the parts to the Blade Mount and the Skid Plate.
2.
Place Skid Plate against frame with the slots facing forward and the front hole on the right hand side.
Locate the holes in the frame that attach the Skid Plate and loosely install the M8 bolts and nust
provided. Leave loose.
3.
Hook the “U Bolts” over the frame rear cross member aligning with the slots in the Skid Plates
4.
Hook the remaining two “U bolts” over the sides of the frame in the general area of the slots in the
mounting plate.
5.
Place the mounting plate up to the frame with the mounting tabs as shown attach “U bolts” and
tighten securely.
6.
Tighten all hardware.
Item #
Description
Part #
1
Mount Plate
10620TK
2
Skid Plate
10463TK
3
U Bolt
NB724
4
Bolt M8-1.25 X 25
NB723
5
Hair Pin #39
NB127
6
Clevis Pin
10305
7
Flat Washer
NB275
8
Nyloc Nut
NB181
9
Nut M8
MB718
