Item #
Description
Part #
7
Bracket-Lift Strap
12984TK
8
Spacer
7825Z
9
Bolt 5/16-18 X4
NB513
10
Washer
NB275
11
Nylock Nut 5/16-18
NB181
Assembly Instructions
Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need
to be removed. Please retain plate and hardware to be reinstalled if the plate is removed.
Blade Mount Kit
1.
Separate and Identify the parts to the Blade Mount and the Manual Lift Strap Bracket.
2.
Place the U-Bolts over the foot Rest tubes adjacent to the frame braces.
3.
Attach the plate with Washers and Lock nuts as shown, The blade mount tabs are pointing down and
to the front of the ATV, and snug the nuts
4.
Center the plate, assuring proper clearance with the Drive shaft universal joint.
5.
Tighten the nuts securely
Manual Lift Strap Bracket ( Only mount if using the manual lift kit)
1.
Remove the bolts near the headlights.
2.
Place bolt Bracket and three spacers into the hole and attach nut on the inside.
3.
Repeat with the other side.
4.
Slip Lift Strap through the hole and loop through itself.
Item #
Description
Part #
1
Mount Plate
12982TK
2
U Bolt
7874Z
3
Washer
NB275
4
Nylock Nut
NB181
5
Hair Pin #39
NB127
6
Clevis Pin
10305
1
2
3
4
5
6
7
8
9
10
11
Lift Strap Mounting
