CAUTION: CARELESS OR IMPROPER HANDLING MAY RESULT IN
SERIOUS INJURY.
20
GENERAL RECOMMENDATIONS
The warranty on this Spreader does
not
cover items that have been subjected to operator abuse or
negligence. To receive full value from the warranty, operator must maintain unit as instructed in
this manual.
Some adjustments will need to be made periodically to maintain your unit properly.
BEFORE EACH SEASON
•
Check the UHMW Washer (21967) for wear, replace if needed. See
Page 31
•
Check for Gearbox oil leaks.
•
If a leak is found, remove Gearbox from the spreader and check oil levels.
Replace/add if oil is low or dirty. There should be 12oz of SAE 90 or 80W90 gear oil in
the gearbox.
•
Check Wheel Bearings for failure or damage.
•
Check Operation of All Controls.
•
Check tires for wear and damage.
•
Replace Agitator Cotter Pin (10936). See
Page 31
BEFORE EACH USE
•
Check all Hardware for Looseness or Damage.
•
Check Tires for proper inflation.
•
Ensure axle Pin is either in the holding location or the Axle Coupler.
•
Lubricate threads of Top Link (P/N 21103) if needed.
AFTER EACH USE
•
Check all Hardware for Looseness or Damage.
•
Check Tires for proper inflation.
•
Clean Thoroughly
. Refer to page 21 for cleaning guide.
Important: Replace parts that have been damaged.
Important: Check Disc and Hopper mounting hardware on a regular basis to make sure it is
tight.
SPREADER MAINTENANCE
Summary of Contents for HOBBY FARM PRO 22000
Page 34: ...34 When ordering replacement parts USE PAINT CODE TK BLACK NOTES...
Page 35: ...35 When ordering replacement parts USE PAINT CODE TK BLACK NOTES...
Page 36: ...36...
Page 37: ...37...