6
Installation, Maintenance, & User Manual
Additional Attachments
• Before you begin assembly, ensure your selected site has adequate clearance for the safety zone and prepare a
level surface. Two adults needed to assemble. It will be very difficult to move your SwingSesh once assembled, so
it is important to place the feet in their intended assembled location during installation.
•
Assemble all parts on a non-scratch surface to prevent damaging the finish.
• It is important to follow the bolt direction and bolt tightening sequence as indicated in the illustrations. DO NOT
OVERTIGHTEN BOLTS AS TUBING CAN DISFIGURE. Make sure all fasteners used are as specified. Using
a fastener not specified in a particular application may result in too much thread exposure or not enough thread
engagement.
Attach hex head bolts as pictured below:
Attach carriage bolts as pictured below:
Assembly Instructions
HEX BOLT
FLAT
WASHER
LOCK
WASHER
HEX
NUT
FLAT
WASHER
• If attaching other attachments such as a wall ball, squat rack, or climbing rope, it is recommended you decide on
the placement of those attachments before beginning assembly.
• CLIMBING ROPE EXTENSION
. Specifically, if you are installing a climbing rope extension with your set, please
read the climbing rope extension assembly directions carefully before you begin installation of your set.
STEEL PARTS
CARRIAGE BOLT
FLAT
WASHER
LOCK
WASHER
HEX
NUT
STEEL PARTS
Summary of Contents for SlimSesh SS2
Page 2: ......
