SwingSesh SlimSesh SS2, Manual

Page: 15 / 30

13
w w w . s w i n g s e s h . c o m
NOTE: Use C8 instead of
C7 if model with no slide or
if using Configuration 2 or
Configuration 3 .
C7
C6
STEP 2 Back Wall Sub-Assembly
• Lay Posts A6 and A9 on the ground with feet facing up.
• Place Split Railing C7 between A7 and A8 . If assembling the set in Configuration 2 or a set with no slide,
use Full Railing C8 instead of the Split Railing C7 .
• Loosely attach Split Railing C7 to A9 using two (2) 31/4” bolts, hand tighten.
• Align Half Railing C4 to Post A6 and Split Railing C7 . Attach all three parts using two (2) 31/2” bolts.
• Tighten all bolts using wrenches.
A8
A7
C4
PARTS REQUIRED:
Post
Post
Half Railing (or C12 Monkey Bar Railing, if using Configuration 3 )
Split Railing (or Full Railing, if model with no slide or Configuration 2 or Configuration 3 )
HARDWARE REQUIRED:
31/4
” bolt, 2 washers, lock washer, nut
31/2 ” bolt, 2 washers, lock washer, nut
x2
x2
C6
A7 A8
A7
C6
C6 A8 C4
31/2”
31/2”
31/4”
31/4”
A7
A8
C6
C7
C7 C6
C6
A7 A8
NOTE: Use C8 instead of C7
if using Configuration 3 .
C12
C4
C4
C12