Swing Connect Race Lite, Owner'S Manual

Page: 22 / 33

22 Section 03 Harness features
Closing the V-line channel
system
The CONNECT RACE LITE has a Velcro-
free V-line channel system. To close it,
first undo the zip fully (before closing
the container). The zip is located
behind the shoulder strap on the side
of the harness opposite the reserve
handle. Then pull it all the way down to
the reserve container.
Zip underneath the top flap Fig. 41
When you are sure that the V-line is
lying correctly in the channel, pull the
zip in the opposite direction back to its
original position.
Closing the V-line channel Fig. 42
The zip is now closed and the V-line
channel’s warning colour is no longer
visible.
V-line channel when closed Fig. 43

PLEASE NOTE
Ensure that the end of the zip is
closed by the reserve pocket before
locking the pin. If it is not, the V-line
channel could open during flight
and the V-lines could fall out.
Compatibility test
Every new combination of reserve and
harness/outer container must be
inspected after the first packing to
ensure that it operates safely. It must
be possible for the pilot to deploy the
reserve from the flying position
without any problem and according to
the guidelines in the manufacturer's
instructions. The inspection must be
recorded in the reserve's packing
certificate (compatibility test).
We recommend that the compatibility
test is carried out by the dealer.
⚠
DANGER
A deployment check must be carried
out if a newly packed chute is
integrated in a harness outer
container, checking whether the
deployment force is between 6 and
10kg.