Swing Connect Race Lite, Owner'S Manual

Page: 21 / 33

Harness features Section 03 21
The long pin is then passed through
the hole next to the closure flap into
the rescue compartment.
feeding the long pin into the Fig. 37
rescue compartment
Now close the second loop using the
long pin from the deployment handle.
Threading the long pin Fig. 38
Once again, insert the end of the pin
into the opening behind the loop and
carefully remove the cord.
Rescue handle with inserted split Fig. 39
pins
Harness with closed rescue Fig. 40
container
⚠
Danger
The deployment handle may be
blocked and the reserve may be
difficult to operate or may not
deploy at all if the above instructions
have not been followed.
Make sure that it has been attached
correctly by carrying out a trial
deployment.