Swing-N-Slide WS 8351 Assembly Instructions Manual Download Page 59

Page: 59 / 64

STEP 46

Loc-Nut

5/16’’ Flat

Washer

5/16”-18 x 6-1/2”

Hex Bolt

QuickLink

Wind-Rider

Wind Rider Assembly

1. Insert Seat into Handle as shown in (Step1). Secure in place with hardware shown.

Note:

Make certain no more than two bolt threads protrude from the Loc-Nut once fully tightened.

2. Insert (1) Quick Link into the end of each length of chain, as shown in (Step 2). Make certain the Quick

Link is positioned as shown.

3. Using the Quick Link, attach each length of chain to the (4) corners of your swing as shown in (Step 3).

Make certain Quick Link is positioned as shown.

4. Attach (2) Chains per Swing Hanger, as shown in (Step 4).

5. Close and tighten all four Quick Links with a suitable wrench.

51” Un-Coated

chain

5/16’’ Flat

Washer

Wind Rider

Summary of Contents for WS 8351

































































Search results

Summary of Contents for WS 8351

Reviews:

Related manuals for WS 8351

Brands by name

Popular brands

Swing-N-Slide WS 8351, Assembly Instructions Manual

Search results

Summary of Contents for WS 8351

Reviews:

Related manuals for WS 8351

Brands by name

Popular brands