1.
7DS7QXWLQWR¶¶KROHDVVKRZQLQ
(Step 1)
.
2.
Place a Slotted beam clamp over the swing hanger as shown in
(Step 2)
.
3.
Insert the swing hanger into the beam and thread it into the T-nut until it is flush or near flush
with the top of the T-nut. A screwdriver may be used to twist the hanger, as shown in
(Step 3)
.
4.
Orient swing hanger as shown in
(Step 4)
.
8VHPPVFUHZVWRVHFXUHEHDPFODPS
5.
Check hanger to ensure it does not spin.
6.
Repeat for all swing hangers.
(4) 1-1/4'' screws
Swing Hanger
Use Screwdriver to aid in tightening
Slotted Beam Clamp
t-nut
Hammer
3/8'' hole
Slotted Beam Clamp
Swing Hanger
Swing
Beam
T-nut
Fig. 9
CORRECT!
PPVFUHZV
30mm Wood Screw
