Anchor-It Installation.
II
n
nssttrru
uccttiio
on
nss ffo
orr A
An
ncch
ho
orriin
ng
g S
Sw
wiin
ng
g•
•N
N•
•S
Slliid
de
e A
Accttiiv
viitty
y C
Ce
en
ntte
errss
1.
Determine the final location of your activity center.
2.
Place the Anchor-It stakes adjacent to the base and near the corners of
your activity center (at the bottom of the legs on swing sets) and twist the
auger-style stakes into the ground until only the loop is exposed.
3.
Place the metal strap through the loop of the Anchor-It stake and secure it
to the unit with a lag screw and washer as illustrated to the right. Note:
Attach the strap to the unit with as little play as possible using whatever
holes in the strap that work best.
Anchor-It
Fig. 12
1'' Truss Screw
Use truss head screws to
to secure slide to deck.
Slide Installation.
1.
Install Slide centered in the provided
opening as shown in
(Fig. 12)
.
2.
Attach Stake to end of slide as shown in
(12a)
.
Fig. 13
1-1/2"
Lag Bolt
Metal
Strap
Anchor-It
PineBluff Assembly Instructions
18
2'' Above Ground
(2)
1-1/4'' screws
per joint
2'' x 4'' x 17-1/4''
Fig. 12a
5/16'' Flat
Washer
