32
PROJECT 515
Fig. 19
R. Swing Hanger Installation
1. Tap t-nut into 3/8" hole as shown in (Fig. 19)
2. Place a bottom beam clamp over the swing hanger as shown in (Fig. 19)
3. Insert the swing hanger into the beam and thread it into the T-nut until it is flush or near flush with the top of the T-nut. A screwdriver may be
used to twist the hanger (Fig. 19). Orient swing hanger as shown in (Fig 19).
4. Use (4) 1-1/4" screws to secure beam clamp.
5. Check hanger to ensure it does not spin.
6. Repeat for both swing hangers.
(4) 1-1/4'' screws
Swing Hanger
Use Screwdriver to aid in tightening
Bottom Beam Clamp
t-nut
Hammer
3/8'' hole
T-nut
Summary of Contents for Kodiak PROJECT 515
Page 51: ...51 PROJECT 515 51 ...
Page 105: ...53 PROYECTO 515 PROJET 515 ...
