40
MV-1908-11-2017 . © All rights reserved Swim & Fun Scandinavia ApS
UK
Press the RUN/STOP button to put it into on mode, this will start the pump.
Press the RUN/STOP button
to stop the pump
3.3.3. PROGRAMMING FOR AUTOMATED FUNCTION
In stop mode press the SET/RESET button
once. The display will now show MANUAL,
LOW RPM and the speed in rpm.
Press the BACKWASH button. The display will
now show backwash and the rpm.
3.3.2 MANUAL BACKWASH PROCEDURE
CURRENT TIME
In stop and Auto Mode, Press UP and
Down button to set Current time,
Press the SET/RESET button to step over from
hours to minutes. The display will then flash the
minute digits.
