MAELSTROM D5-X SERIES
– QUICK INSTALLATION GUIDE
Copyright Swiftech® 2018
– All rights reserved – Last revision date: 2-16-18– Rouchon Industries Inc., dba Swiftech® –3729 San Gabriel river parkway, suite B & C, Pico Rivera, CA 90660
Toll free 888-857-9438
– Tel. (562) 821-5924, Fax (562) 821-5927 - E Mail: [email protected] – URL: http://www.swiftech.com - Information subject to change without notice
Installation of the clamps only provided
with the Maelstrom D5-X200 and X300 models
(clamps are neither included nor necessary with the Maelstrom D5-X50 or X100)
Due to the substantial height of the reservoir for the above two models, additional clamps are provided to
ensure a secure installation to the computer case.
1.
Drill 2 x Ø4.5mm (
3/16”) holes, 8.5mm (0.335”) apart, along the centerline of the reservoir. Adjust the relative
height of the holes depending on your own installation.
2.
Fasten the clamps to the reservoir using the provide M4 x 35mm socket head screws
3.
Fasten the clamps to the panel using the provided M4 x 8mm screws
Maelstrom
ALED
Mini 3-pin connector
