background image

Approved Use 

 

 
The  SWI-TEC  Mastlift  is  a  manually  operated  drum  winch  for  lifting  and 
lowering persons. It is only for boat leisure approved and not for industrial use.  

 
 

The hand-operated drum winch must not be used to transport material loads. 

 

The  drum  winch  may  be  used  for  the  transport  of  persons  only  in  conjunction 
with  a  second  independent,  tested  and  approved  fall  arresting  device  (e.g. 
guided  type  fall  arrester  or  retracting  lifeline)  and  must  be  attached  to  a 
separate, tested anchorage point. 

 

The  drum  winch  must  not  be  used  in  areas  exposed  to  higher  risks  such  as 
danger of explosions or corrosive environment. 

 
 

1. Description of the SWI-TEC Mastlift 

 

 

The drum winch may be used for lifting, lowering and positioning of persons. 
 
The drum winch has a Load Line which is wound on a drum. With the use of an 
Endless Line the Load Line can be wound onto or off the drum. In this way the 
person is lifted or lowered. A pawl/ratchet mechanism ensures that a person is 
always securely held in position at all times. The SWI-TEC Mastlift has a Load 
Line guide. 

 
 
 
 
1.1 Standard features of the SWI-TEC Mastlift: 

 

SWI-TEC Mastlift 13m 

 

  Weight: 6.7 kg 

  Dimensions: Ø 165 mm, L = 215 mm 

  Approved load of 150 kg 

  A drum roll with 6 mm Polyester-Dyneema rope 

  Working height: 13 m 

  Number of Load Line layers: 6 layers 

  Two layers of rope remain on the drum at the end of downward 

movement. 

  Aluminum / plastic housing 

  Ambient temperature for operation: between -30° C and +50° C. 

  Ambient temperature for lubricants: between -30° C and +120° C. 

  Noise: 

≤ 70 dB(A) 

  A manual force of about 26 daN is required on the Endless Line when a 

maximum load of 150 kg is applied to the top rope layer. 

  Load Line: 

Summary of Contents for Mastlift














Reviews: