T82
3
D
ok
: 101540-
GB 2051
SAFETY INSTRUCTIONS
• Before using the machine, the operator must be in-
formed of the manufacturer’s safety instructions and
instructions for use.
• The machine may only be used outdoors.
• The machine may not be used if protection and sa-
fety devices are not present or not working.
• The operator may not leave the machine unattended
when the engine is on. When the vibrator is con-
nected, the operator must be able to control the mo-
vement of the machine using the control handle and
the start/stop controls. The machine may be operated
only by a trained operator.
• During maintenance work or other interventions in
the machine, the engine must always be off.
• Switch the engine off before adding fuel. Avoid fuel
spillage and immediately wipe off any spilled fuel.
Add fuel only in well ventilated areas.
• Avoid touching hot engine parts, for example the
silencer.
• Before lifting the machine, check that the lifting de-
vice and its mounting are not damaged and that the
rubber dampers on the base plate are undamaged and
tightened.
• During transportation and storage, the fuel tank
should be empty and the fuel cock switched off.
• When the machine is parked, ensure that it cannot tip
over. The machine may not incline more than 20º.
• The operator must use ear protectors when working
with the machine.
• The operator must ensure that no unauthorised per-
sons are in the immediate vicinity of the machine.
•
Always wear personal protective equipment as heavy,
non-slip shoes, ear protectors and approved eye
protection.
•
The machine may not be used in environments with
potentionell fire or explosion danger.
•
Never use the machine if you are tired or have
consumed alcohol or are under medication that
could affect your vision, your discretion or you
coordination ability.
•
Never use a machine in any way changed from the
original design.
STANDARDS
Noise
Measurement in accordance with the standard EN
500-4 Rev. 1:1998, Annex C:
Measurement uncertainty ± 0.5 dB (A) in 95% of the
measurements.
In accordance with the conditions in Directive
2000/14/EC, Annex VI, the following values are
reported, see next page.
As the sound pressure level at the operator’s ears
exceeds 80 dB (A), ear protectors must be used
during operation!
Hand/arm vibrations
The vibration acceleration was measured in
accordance with the ISO 5349 standard during
operation on a surface of macadam. The measurement
values were translated into the maximum daily
exposure time for regular usage. For additional
information about vibrations, please confer the
regulation AFS 2005:15 from the Swedish Work
Environment Authority, effective July 1st 2005.
Measurement uncertainty ± 0.3 m/s2 in 95% of the
measurements
