swepac FR95, User Manual In Original

Page: 6 / 16

6
F95
D
ok
: 101536-
GB 2045
FR 95
Net weight................................................................... 89 kg
Base plate, ..........................................w x l 430 x 435 mm
Operational speed approximately ...................25 m/min
Permitted inclination .....................................................18°
Centrifugal force ...................................................14,000 N
Vibration frequency ...................................................91 Hz
Drive engine .................................................HondaGX 160
Engine power ............................................................3,6 kW
Engine RPM .........................................................3600 RPM
Fuel tank volume ....................................................3,1 litre
Fuel type ..........................Unleaded petrol, 95-98 octane
Oil quantity, crankcase ..........................................0,6 litre
TECHNICAL DATA
METHOD OF OPERATION
The machine consists of a base plate with vibrating
elements and a top-mounted suspended plate.
The cushioning between the base plate and the
upper part consists of rubber dampers. The
power is transmitted from the petrol engine to
the vibration element via a V-belt which can be
adjusted with a belt tensioner. The engine V-belt
pulley is fitted with an integrated centrifugal clutch,
which allows the engine to be started and run idle
without the vibrator being connected. On account
of the direction of rotation and the position of the
vibration element at the front end of the base plate,
the vibrator moves forwards under its own power.
The petrol engine is well protected against damage
in connection with use and transportation by a
sturdy protective frame with a protective panel on
the top.
OIL and FUEL RECOMMENDATIONS
Fuel ........Unleaded petrol or alkylate
Engine oil ....... SAE10W-30
Engine oil change: first oil change after 20 hours then
every 100 hours of operation.
Note! Vibration element for the FR95 is grease
lubricated. The bearing can not be re-greased, and is
permanently lubricated.
This means that no oil is needed for the vibration
element.