5
F 80A
D
oc: 101516-
GB 1810
TECHNICAL DATA
FUNCTION
The machine consists of a base plate with a vibration element
and an upper part cushioned from the base plate.
The upper part include even carrying handle. The lifting eye
include even an water tank bracket.
The power is transmitted from the petrol engine to the vibration
element via a V-belt. To adjust the V-belt loosen the four screws
which holds the upper part to the base plate and pull whole the
upper part backward to the operator.
The engine is fitted with an integrated centrifugal clutch. On
account of the direction of rotation and the position of the
vibration element at the front end of the base plate, the
vibrator moves forward under its own power.
The machine’s vibration element stops when the throttle is
switched to idle.
Work with the machine in daylight or other adequate lighting.
All other use is discouraged.
Transport wheels are accessories.
FUEL AND OIL RECOMMENDATIONS
Fuel ..............................Unleaded petrol or alkylate
Engine oil .....................SAE10W-30
Engine oil change: first oil change after 20 hours then every
100 hours of operation
F 80A
Net weight .................................80 kg
Base plate, w x l .......................430 x 580 mm
Permitted inclination ................18°
Speed .........................................appr 25 m/min
Centrifugal force .......................14 000N
Vibration frequency ..................93 Hz
Drive engine ..............................Honda GX 160
Engine power ............................4,0 kW
Engine RPM ..............................3600 RPM
Fuel tank volume .......................2,5 liter
Fuel type ....................................Unleaded petrol or alkylatet
Water tank volume....................11 Liter
