5. Settings (SEtt InGS)
Use the
Left & Right arrow keys
to navigate
the settings. Use the
Up & Down arrow keys
to change a setting.
Press Esc or Enter after a change has been
made to apply it, SwemaCO
2
then returns to its
measuring mode. The following settings can be
changed:
bAC. LIGH (Display backlight)
Backlight:
Via settings, use the
Up
or
Down
arrows
.
The
ON/OFF
button also fills this fun-
ction with a short press.
•
Choose Mode to access Set-
tings, Log and Notebook.
SEtt InGS - Settings
Auto Shut
Auto Shut:
Time before automatic shut off, (af-
ter the last button press) 60min, 30min, 10min,
5min and 1min (
OFF
disables the auto shut off
completely.)
•
Unlt SySt
Unit system:
Système international (SI) Uni-
ted States customary (US)
change of international measurement (SI) or
american measurement (US)
Arrow Up
and
Arrow Down
.
•
4. Function keys
The bottom section of the display is divided into
three sections, and three function keys are situated
directly below these. The function of these keys
vary, and is described in the three sections above.
Mode is the only possible choice while the instru-
ment is measuring.
Mode allows you to change
Settings
,
Log
or
view saved measurements and logs (
Notebook
).
To access
Settings
for example,
press
Mode
, move
with the
arrow keys
until
Settings
starts blinking.
Press
Enter
.
”Up”
or
”Down”
arrows,
for
On/Off
.
3.
