© 2015 SWELLPRO All Right s Reserved
28
The Bluetooth Datalink module includes 2 parts: Transmitter terminal and Receiver terminal. The
on-board part connects to the ‘COM’ channel of flight controller, and communicate with the
on-ground part via 433MHz/915MHz wireless signal.
Notice: The OSD converter CAN’T be used together with Smart ground station at the same
time. If wanna to see flight data on the Radio controller screen, please remove the cable
that connects to the ‘COM’ channel in the receiver, and connect the OSD converter to the
‘COM’ channel according to below picture:
Default factory setting is 14.4V, the indication
LED keep fast flashing and drone will land
automatically. If want to change the landing
location, push the throttle to 70%, the drone
will hover. When the throttle goes back to
neutral position, the drone lands
automatically again.
Second Level
4.5 Smart Ground Station system
4.5.1 Bluetooth Datalink Module
4.5.1.1 Wire Connection
Summary of Contents for Splash Drone Auto
Page 45: ......
