ENglISH VErSIoN
14
Wireless network configuration
It is recommended to only adjust wireless settings from a computer connected to the router by network cable, especially when changing wireless
security settings. This will prevent the connection from being lost if you accidentally apply incorrect settings.
To adjust the wireless network configuration, first login to the router as described in the “Advanced Setup” chapter, then click “Wireless Network” in
the menu on the left side. You will see the following screen:
SSID
The most important setting in this screen is the SSID, this is the name of your wireless network, used for identification purposes. When SSID
broadcast is enabled, you and everyone else in range of your network can see the name in the list of available wireless networks.
It is recommended that you change the SSID, the default SSID “Sweex LW310V2” can cause conflicts if multiple routers of this model are in range
of each other. When changing the SSID, you will need to connect to your wireless network again as described in the chapter “Connecting to a
wireless network”.
Channel
The Channel setting controls the frequency on which the router transmits its wireless signal. With the default option, “AutoSelect”, the router will
scan all channels when powered up and automatically select the channel with the best signal conditions. Changing the channel is only recommended
when you experience poor wireless performance of the router.
Other settings
These settings are for experts only and normally do not need to be changed. The default settings provide an optimal mix between performance and
compatibility. This also applies to the advanced settings page accessible in the menu on the left.
LW310V2_Manual_01.indd 14
03-11-09 13:32
Summary of Contents for LW310V2
Page 31: ...English version 32 ...
Page 32: ...English version 33 ...
