User Manual: Sweetlight FR-252 MK2
7
■
Operation
User interface overview:
1
MODE selection button
2
UP-Button
3
DOWN-Button
4
Display showing the Mode, DMX-address, etc.
5
DMX input
6
DMX output
7
AC output
8
AC input
Upon the user’s choice, the unit can work stand-alone with fixed colors or may be
controlled by external DMX-controllers. Available modes:
“A” Mode (Auto / DMX Master)
Press the MODE button (1) until the first digit on the display show “A”, indicating
operation in “A” mode. In this mode, a chaser or strobe preset can be displayed by the
unit. Use the UP/DOWN buttons (2/3) to choose one of the 25 presets as shown in the
list below.
In “A” mode, The unit does not receive any values from the DMX input but generates its
own chases and creates related DMX values on the output with channels 001 to 012 so
that similar units can show the same chase pattern if they are connected by DMX and
set to ”Slave Individual” mode “SLI” (see DMX channel assignment under “notes”). The
level at all programs is 100%. The speed is set to 2Hz (120 BPM) with hard switching
between the steps.
